The Rock Krawler 4.5 Adventure-X Systems is the ultimate in compromise between daily driver/hard core off-roader. The Adventure-X systems combine the benefits of a full high clearance 4 link front suspension with a high clearance independent 3 link rear suspension. This is where conventional on road handling meets bad a$$ off-road ability. The rear system uses our tried and true independent 3 link conversion with X2 rear suspension geometry with enhanced rear instant center(s) and rear roll center(s). The combination of a full high clearance 4 link long arm front suspension and high clearance independent 3 link rear long arm suspension lets you dominate the streets and the trails.
System Benefits:
System Includes:
*hardware and detailed instructions
Tire Fitment:Sport and Sahara with Full OEM Fenders38" Tall Tires (4" Bump Stop Height Recommended)Sport and Sahara with Trimmed or High Lined OEM Fenders40" Tall Tires (4" Bump Stop Height Recommended)Rubicon with Full OEM Fenders39"/40" Tall Tires (4" Bump Stop Height Recommended)Rubicon with Trimmed or High Lined OEM Fenders42" Tall Tires (4" Bump Stop Height Recommended)
Wheel Fitment:Sport and Sahara Wheel Fitment Recommendations38" Tall Tires - Recommend 3.5" of BackspacingRubicon Fitment Recommendations39" Tall Tires - Recommend 4.0" of Backspacing42" Tall Tires - Recommend 3.5" of Backspacing
Shock Notes:Generic Front Shock Length - 18 5/16" Collapsed/ 30 5/16" Maximum ExtendedGeneric Rear Shock Length - 18 5/16" Collapsed/ 30 5/16" Maximum Extended
General Notes:*Requires the use of Steersmarts XD Yeti HD Bottom Mount Drag Link for Off-Road Use*All lift heights based on Rubicon Models*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29"*Requires welding of the Front and Rear Long Arm Mounts*Requires removal of the OEM frame side lower front and rear control arm mounts*Requires removal of the OEM frame side front and rear upper control arm mounts*Requires removal of the OEM axle side rear lower control arm and track bar mounts*Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up