Rock Krawler JLU 3.5 Inch X Factor X2 Long Arm System

Your Price: $4,862.76

Retail Price:$5,118.69

You Save:$255.93(5%)

JLU - 4 Door

Part Number: JL35X2LA

Engine Type *

Quantity

Description
More information - Click here

The Rock Krawler JL 3.5 X Factor X2 Systems is the ultimate JL Long Arm system. The X Factor systems feature 3 link rear set-up front & rear for maximum articulation and off-road performance. The rear suspension provides the tried and true independent 3 link conversion with X2 rear suspension geometry. New high clearance axle mounts provide 4.5” of ground clearance under the rear axle as compared to stock. Rear upper shock relocation brackets ensure you do not lose any shock travel. The combination of high clearance long arms and 3 link suspension geometry lets you dominate the trails.

System Benefits

Excellent Highway Ride
Improved Off-Road Ability
Full High Clearance Design
Independent 3 Link Long Arm Front Suspension
Independent 3 Link Long Arm Rear Suspension
Weld on Long Arm Mounting Brackets with Weld Scheduling just like OEM
Heat Shield thermal barrier products, just like OEM to protect the front control arm joints at the frame
4.5” Rear Clearance Gain from the X2 Axle Bracket System
Adjustable Rear Anti-Squat Featuring X2 Geometry

System Includes:

(1) Weld-on front long arm mounting system
(1) Heat Shield Products Sticky Shield Kit
(1) Front adjustable anti-wobble track bar
(2) actor front lower control arms
(1) Adjustable front upper control arms
(1) Front sway bar disconnect kit
(4) Triple rate coil springs
(4) JL coil spring correction seats
(2) Weld-on rear frame side long arm mounts
(2) High Clearance X Factor Rear lower control arms
(1) Rear upper control arm
(1) Rear frame side upper control arm mount
(2) Rear extended sway bar links
(1) Rear adjustable anti-wobble track bar
(2) Weld-on rear upper shock mount
(2) Weld-on rear axle side control arm mount
(1) Weld-on rear track bar mount
(1) Weld-on rear axle truss
(2) Rear brake line relocation brackets

*hardware and detailed instructions

Tire Fitment:
Sport and Sahara with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Sahara with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)

Wheel Fitment:
Sport and Sahara Wheel Fitment Recommendations
37/38” Tall Tires - Recommend 3.5” of Backspacing
Rubicon Fitment Recommendations
37” Tall Tires – Recommend 4.5” of Backspacing
40” Tall Tires – Recommend 3.5” of Backspacing

Shock Notes:
Generic Front Shock Length – 18-19” Collapsed/ 30” Maximum Extended
Generic Rear Shock Length - 20-21” Collapsed/ 32” Maximum Extended

General Notes:
*All lift heights based on Rubicon Models
*Requires the use of an Aftermarket Front Axle Housing with FAD Delete to Weld the Front Upper Arm Mount to
*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29"
*Requires welding of the Front and Rear Long Arm Mounts
*Requires removal of the OEM frame side lower front and rear control arm mounts
*Requires removal of the OEM frame side front and rear upper control arm mounts
*Requires removal of the OEM axle side rear lower control arm and track bar mounts
*Requires modifying the OEM rear shock mounts and welding of the raised rear upper shock mounts
*Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up

Rock Krawler JLU 3.5 Inch X Factor X2 Long Arm System

Choose Options

Recently Viewed Items