TeraFlex JK: Alpine Long Control Arms and Alpine Long Arm Brackets (not included) provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 3-6” lifts. Bolts to the factory control arm mounting brackets. Can be added to any existing suspension lift.
High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, harshness) damping and ride quality.
MUST be used with TeraFlex JK: Alpine Long Arm Bracket Kit (# 1957000) – NOT INCLUDED. On higher lifts, Alpine Long Arm Brackets reposition the frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the control arms.
These CAD-designed Alpine Long Arm Brackets are engineered for maximum strength. By streamlining the frame-end mounting points, Teraflex incorporated both upper and lower mounts in each bracket thus simplifying installation while maintaining a factory appearance.
Fits:
• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)
• 3-6” Lift
Includes:
Alpine Long Control Arms:
• Front Upper – pair
• Front Lower – pair
• Rear Upper – pair
• Rear Lower – pair
Features & Benefits:
JK Alpine Long Control Arms:
• Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits
• Alpine Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength
• On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the Alpine Long Control Arms
• Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
JK Alpine Control Arms (all):
• Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• Full range of movement will not restrict articulation or flex off-road
• High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality.
• Zero maintenance forged threaded joints for smooth quiet flex
• Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• TeraFlex Lifetime Warranty against defects
Long Control Arm Specs:
JK:
Alpine Long Control Arm Kit – Front Upper:
• Tube Diameter & Wall: 1-5/8” X 0.157” (42mm X 4mm)
• Factory Length = 18-3/4”
• Min. Length = 27-3/8”
• Max. Length = 28-7/8”
• Axle End = 7/16” (12mm) Bolt
• Frame End = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Axle Bushing
• Frame Bushing
JK:
Alpine Long Control Arm Kit – Front Lower:
• Tube Diameter & Wall = 2” X 0.197” (50mm X 5mm)
• Factory Length = 22-5/8”
• Min. Length = 33-3/4”
• Max. Length = 35-1/4”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
JK:
Alpine Long Control Arm Kit – Rear Upper:
• Tube Diameter & Wall: 1-5/8” X 0.157” (42mm X 4mm)
• Factory Length = 17-7/16”
• Min. Length = 20”
• Max. Length = 21-1/2”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
JK:
Alpine Long Control Arm Kit – Rear Lower:
• Tube Diameter & Wall = 2” X 0.197” (50mm X 5mm)
• Factory Length = 19-3/4”
• Min. Length = 35-3/4”
• Max. Length = 37-1/4”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
Note(s):
• REQUIRES cutting and welding.
• REQUIRES cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
• TeraFlex adjustable Long Control Arms (Alpine & Alpine IR) MUST be used w/ Alpine Long Arm Bracket Kit (# 1957000) – NOT INCLUDED.
Install Time: 12 Hours
